Gutekunst form springs sells spring steel strip and spring steel sheets in the most varied Types of material and dimensions from stock. Whether normal steel, stainless steel or copper alloy, hardened or unhardened, rolled up, straightened as rods or in plate form. Select your suitable spring material from the following spring band steels and spring steel sheets. Even in small quantities or individually tailored .

Spring steel stripThe offered in the following table, directed spring band steels C75S + LC and C75S + QT as well as the stainless spring band steel 1.4310 / X10 CrNi 18-8 are available from stock in the specified dimensions. For an order or an inquiry, please click on the respective five-digit order number and tell us the desired order or request quantity and your contact details. When ordering, the spring steel strip will be shipped within 48 hours (depending on availability).

With the spring steel sheet offered below the table, we usually have the most common dimensions in stock for immediate purchase. If you need these spring steel sheets, please send us an order or inquiry with the desired quantity and dimensions via the respective inquiry link< Thickness x width x length> . Gutekunst Formfedern will immediately check whether the spring steel strip or the spring steel sheet is available in the dimensions you require and will make you an offer.

Spring steel strip or spring steel strip and spring steel sheet are offered – depending on the type of material – in different delivery conditions: “LC” annealed and re-rolled or “QT” hardened and tempered. If the flat spring steel is only soft-annealed and re-rolled “LC”, it can still be deformed within certain limits. The spring steel strip or the spring steel sheet then need another heat treatment in the tempering furnace in order to obtain the desired strength. If the flat spring steel offered is already hardened and tempered “QT”, subsequent deformation is very time-consuming and difficult.

Artikelangebot Federbandstahl ab Lager gerichtet in Längen von 1 m

Senden Sie uns bitte bei Bedarf die gewünschte Anfrage- oder Bestellmenge mit Klick auf die gewünschte fünfstellige Federbandstahl-Bestellnummer.
-
AbmessungenC75S LC C75S QTX10 CrNi 18-8
WeichHart
Edelstahl
Weichgeglüht und nachgewalztGehärtet und angelassenGehärtet
W-Nr. 1.1248W-Nr. 1.1248W-Nr. 1.4310
Stärke (mm)xBreite (mm)BestellnummerBestellnummerBestellnummer
0,2x5240022410224202
0,2x10240042410424204
0,2x15240062410624206
0,2x20240082410824208
0,2x30240102411024210
0,3x5240122411224212
0,3x10240142411424214
0,3x15240162411624216
0,3x20240182411824218
0,3x30240202412024220
0,4x10240222412224222
0,4x15240242412424224
0,4x20240262412624226
0,4x30240282412824228
0,4x40240302413024230
0,5x10240322413224232
0,5x15240342413424234
0,5x20240362413624236
0,5x30240382413824238
0,5x40240402414024240
0,8x10240422414224242
0,8x15240442414424244
0,8x20240462414624246
0,8x30240482414824248
0,8x40240502415024250
1,0x10240522415224252
1,0x15240542415424254
1,0x20240562415624256
1,0x30240582415824258
1,0x40240602416024260
1,0x50240622416224262
1,25x10240642416424264
1,25x20240662416624266
1,25x30240682416824268
1,25x40240702417024270
1,25x50240722417224272
1,5x10240742417424274
1,5x20240762417624276
1,5x30240782417824278
1,5x40240802418024280
1,5x50240822418224282
2,0x20240842418424284
2,0x30240862418624286
2,0x40240882418824288
2,0x50240902419024290

 

Spring steel sheet standard

C75S QT (1.1248) or C100 QT (1.1274)

Carbon-based spring steel sheets according to quality standard DIN EN 10132-4. You are stepping up for Spring clips and Retaining springs used. In corrosive or extreme environments, a subsequent Surface treatment necessary. inquiry

Corrosion-resistant spring steel sheet

X10 CrNi 18-8 (1.4310 stainless steel)

The chrome-nickel alloy steel according to DIN EN 10151 is the most commonly used corrosion-resistant material with a sheet thickness of up to three millimeters. inquiry

Non-magnetic and corrosion-resistant spring steel sheet

CuSn 6 (2.1020)

Tin bronze according to DIN EN 1654 is an alloy of copper and tin. It is non-magnetic and has very good electrical conductivity. inquiry

CuBe 2 (2.1247)

Copper beryllium according to DIN EN 1654 is a spring material that is ideally suited for extremely low temperatures. inquiry

 

Do you have any questions or need more information about the spring steel strip and spring steel sheet offered? You can reach the Gutekunst Formfedern sales department by phone at (+49) 07445 8516-11 or vertrieb@gutekunst-formfedern.de .

For more information:

Spring band steel and spring steel sheets from stock